www.inveo.com.pl
  • Model: --
  • IP: --
  • Name: --
  • Firmware: --
  • MAC: --
Administration

This page allows the configuration of the device's access settings.

[X] Close

Inveo Dashboard allows you to control the device by the site http://dash.inveo.com.pl

To start using the service, you must create an account on Inveo Dashboard

  • To add a device copy and paste the key (click to copy) on the dashboard in the 'Add new device' field.
  • To remove the device from all users paste code (click to copy) on the dashboard in the 'Remove from all users' field.
Module name
NameValueDescription
Module name0..15 characters
User Password
NameValueDescription
New Password0..15 characters
Re-type Password0..15 characters
Admin Password
NameValueDescription
Current Password0..15 characters
New Password0..15 characters
Re-type password0..15 characters
Services
NameValueDescription
Enable User Password
Enable Admin Password
Enable Program AccessNeeded by TCPrel and 1 to 1 TCP connection (Destination Client).
Enable MODBUS TCP Server
Enable SNMP
Enable Destination ClientAllow module to send data to other device (1 to 1 TCP connection)
Enable Comm2Other ModuleEnable Multicast P2P communication. Lantick must be restarted after change.
Enable Inveo DashboardEnable control by Inveo Dashboard Website.
Click here for additional info.
Enable TFTP BootloaderAllow remote upgrade firmware by TFTP. For safety reasons, the option should be disabled.
Enable Remote Network ConfigEnable Remote Network Config by Inveo Discover Software
Enable Graphic Mode Config Enable coordinate graphics points config.
Disable LED LED turns off after 5 minutes of pressing the service key.
LED Status 1:
LED Status 2:
Destination Client Settings
NameValueDescription
Destination IPAddress of other device to communicate (1 to 1 TCP connection)
Destination PortPort to communicate
Copyright © 2022 Inveo s.c. Web:1.15